How Much Does a Modular Kitchen Cost in Bengaluru?

Modular kitchen pricing in Bengaluru varies across a wide range, and understanding why requires looking at the components that actually drive cost rather than comparing headline per-linear-foot numbers. A standard 10–12 linear feet kitchen covering base units, overhead units, and a countertop typically costs between ₹2.5 and ₹6 lakhs at entry to mid-range specification. An L-shape or U-shape configuration with more running length scales proportionally, and premium specification can take the same footprint well above ₹10 lakhs.

The single biggest cost variable in any modular kitchen is the shutter finish. Membrane and acrylic shutters sit at the entry-to-mid tier, approximately ₹400–700 per sqft of shutter area. High-gloss acrylic, lacquered glass, and PU paint finishes occupy the premium tier at ₹800–1,500 or more per sqft. The carcase material adds another significant layer — 18mm HWF boards at the entry level, marine-grade or BWR plywood at the premium end, with a meaningful cost difference between them.

Hardware is where Indian kitchens consistently underinvest and later regret. Brands like Hettich, Blum, and Hafele offer soft-close hinges, full-extension drawer systems, and lift-up mechanisms that perform reliably over a decade of daily use. Budget-grade hardware — unbranded or unknown-brand equivalents — fails faster, is louder, and is difficult to replace without partially dismantling cabinetry. The cost difference between good and poor hardware in a full kitchen is often ₹30,000–60,000 — a small fraction of the total for a material improvement that is felt every day.

Countertop choice is the third major variable. Granite at ₹150–300 per sqft fabricated and installed is the most cost-effective durable option. Engineered quartz at ₹450–900 per sqft depending on brand and thickness is the premium standard. Sintered stone surfaces like Dekton command ₹1,200 or more per sqft. Choose based on your cooking style and maintenance preferences, not visual appeal alone.

Chimney and hob are appliance costs separate from cabinetry — but they must be accounted for in the kitchen budget. A quality chimney from brands like Elica, Faber, or Kaff ranges from ₹15,000 to ₹60,000. A good gas or induction hob from the same tier adds another ₹15,000–45,000. These appliances need to be specified during the cabinetry design phase because their dimensions determine hood height, cabinet layout, and hob cut-out sizing.

Vague per-linear-foot quotes are the most common source of budget surprises in modular kitchens. A number like ₹1,800 per linear foot sounds simple but hides the shutter grade, hardware brand, carcase material, countertop type, and which accessories are included. When you receive a quote in this format, ask the studio to break it into its components. A quote that cannot be decomposed into material grades and quantities should not be trusted.

For accurate pricing, request a line-item quote that specifies shutter material and brand, carcase board type and thickness, hardware brand and model numbers, countertop material and thickness, countertop edge profile, and installation inclusions. This is what allows genuine comparison between studios and is the only format that protects you from scope substitution during execution. Compare studios on this basis, not on the headline number.